Eugenio's Peugeot 404 site - My 404

Eugenio's
Peugeot 404 site

Peugeot 404 - Restoration Project - July 13th & 14th, 20023

Preparation for removing the motor. Removed gas filter and gas pump and looked at the wiring. Unmounted water hoses.

Hydrovac wiring marked prior to removal (white mark). And on the right the hydrovac ground on the support strut.

A simplified partial cabling (not really a wiring) diagram.

Brake fluid cover wiring

Gas pump (notice the rubber tube on the right of the first photo and removed on the second photo).

Filter wiring.

Gas hose down from filter.

top of gas filter and gas pump (notice mounting screws)

Water hose before & after unmounting

Same hose with Y in right picture

Alternator wire in the right bottom part of the car and passes behind the hood lock.

"Pulverisateur electric" on "repartiteur" marked with a 7 (blue wire with a dot)

Wiring to right front warning light and the hole the wiring goes through.

(continues) on the underside of the right side (labelled wires)

Once unmounted these wires end up at the "blink box"